Raid Series Armor Package | Full Length Front Bumper | Rear Bumper | Side Steps | Suited for Jeep Gladiator JT

The ultimate kit to get your Jeep Wrangler JL suited with everything to look mean, recover, and light up your adventure.

The world's first fully crash safety tested and SRS airbag compatible tubular front and rear bumper to suit Jeep Wrangler JL. 

Leveraging our experience of designing and manufacturing vehicle armor for military, fleet, and recreational purposes, the mission was to create the safest, most feature-loaded 4x4 steel bumper on the market.

The RAID 4x4 bumpers blend the Australian mindset of functionality with American design characteristics. As a result, the protective bumper provides you and your passengers maximum safety for daily driving with the essential trail-ready features of improved vehicle protection, increased approach angle, additional ground clearance, and winch carrying capability. 

The Ironman 4x4 Raid series bumper uses our two-stage attachment design, connecting the winch cradle directly to the chassis for the most robust possible recovery platform. Alternative one-piece bumpers pull from the bumper shell, causing twisting and potential deformation to the steel bumper and vehicle. In addition, the frame-mounted rated recovery points (3,500kg/7,700lbs) give you a concrete foundation for recovery or towing. 

The Raid off-road steel front bumper comes fully loaded with a 20", 105W single row OSRAM chip LED light-bar delivering projection of 8820 Raw lumens into the road ahead for confidence-boosting visibility in nighttime driving. The new hooded reflectors direct the light beam more effectively and reduce glare commonly found in light bars.

In addition to the powerful light-bar are two customizable OSRAM chip LED cube lights with up to 4800 lumens; choose between clear or amber, spot or flood. All lights feature a flat, UV-stable polycarbonate lens designed to reduce rain/snow/ice build-up.

The Raid off-road steel rear bumper comes fully loaded with two frame mounted rated recovery points (3,500kg/7,700lbs) and four OSRAM chip LED cube lights with up to 1920 lumens. All lights feature a flat, UV-stable polycarbonate lens designed to reduce rain/snow/ice build-up.

The RAID rock rails / side steps provide a safeguard against off-road damage from rocks, stumps and ground strikes. These rock rails / side steps are frame mounted and offer an easy bolt on installation. Combining the RAID rock rails / side steps with the RAID Series bumpers provides complete protection in one package. 

Additional Features:

• Two-part front bumper design with a winch cradle mounted directly to the chassis for the strongest and safest possible winching platform for the harshest recovery situations
• Bolt-on, frame-mounted recovery points (3,500kg/7,700lbs) included with the bumper
• Integrated crumple zones transfer energy away from vehicle occupants
• ADR 69, 73 approved (Full Frontal and Offset Impact Occupant Protection)
• Tested to the highest standards in compliance with Australian Design Regulation, SRS Airbag tested and certified
• Winch compatible with clutch handle access and line visibility
• Standard 10” x 4.5” winch mount footprint
• Don’t want to run a winch yet? Raid comes with a winch “black out plate” to maintain a clean seamless look.
• Pickled, cold-rolled steel manufacturing for impurity free template during assembly
• Ultra-durable AKZO NOBEL Black Powder Coat and pre-treated steel for rust resistance
• 360° Robotic welding for consistently precise welds resulting in peak quality and unequaled strength
• Hi-lift Jack points built into the bumper so there’s no need for high lift hooks
• Integrated light bar and dual cube lights
• Increased approach and departure angles provide maximum clearance for obstacles
• Compatible with factory parking sensors

Specifications

• Full Length Front Bumper Approximate Weight: 101lbs
• Rear Bumper Approximate Weight: 51lbs
• Rock Rails / Side Steps Approximate Weight: 95lbs

This Kit Includes:

• Raid Full Length Steel Front Bumper
• Bolt-On installation with mounting hardware
• 20" Saber-X Single Row Slim Light bar
  

• Front Bumper LED Lighting (depending on selection will include one of the following):
• (2) 3.2" 40W Cube Spot Beam LED Lights - Clear
• (2) 3.2" 40W Cube Spot Beam LED Lights - Amber
• (2) 3.2" 40W Cube Flood Beam LED Lights - Clear
• (2) 3.2" 40W Cube Flood Beam LED Lights - Amber

• Raid Rear Steel Bumper
• Bolt-On installation with mounting hardware

• Rear Bumper LED Lighting (depending on selection will include one of the following):
• (2) 2.8" 20W Cube Spot Beam LED Lights - Clear
• (2) 2.8" 20W Cube Spot Beam LED Lights - Amber
• (2) 2.8" 20W Cube Flood Beam LED Lights - Clear
• (2) 2.8" 20W Cube Flood Beam LED Lights - Amber
• (2) 2.8" 20W Cube Flood Beam LED Lights - Red

• Raid Series Rock Rails / Side Steps
• Bolt-On installation with mounting hardware

Note: Does not include wiring harness.  Recommended wiring harness setup:

• For front bumper light bar: 1x IWHL001
• For front bumper cube lights: 1x IWHL002
• Front bumper cube lights can also be wired into factory fog lights
• For rear bumper cube lights: 1x IWHL002

Warranty

Click here for more details.

Installation

Raid Steel Front Bumper Line Drawings

Raid Series Full Length Front Bumper Install Guide

Raid Series Rear Bumper Install Guide

Raid Series Rock Rails / Side Steps Install Guide

Full Length Front Bumper Install Video: