Portable Solar Panel Kit - 200W
Portable, compact and efficient, Ironman 4x4’s Solar Panels produce optimal output and power supply, while remaining protected from the significant heat damage.
Withstanding the harsh Australian conditions, the premium 7 layer cell construction provides optimal resistance to heat damage, durability and increased power supply through all conditions. With 15-20% higher efficiency than polycrystalline cells, the monocrystalline cells produce more power with less space whilst the ETFE layer protects the panels from damage caused by high temperatures, corrosion and stains.
Constructed with shingle technology, the cells are cut into 5 equal parts and connected by sub-strings allowing the cell to bypass shaded areas and maximise power output. Compared to conventional panels, the effect of bad cells is significantly reduced, eliminating the risk of hot spots and permanent damage.
Included in each kit, the lithium compatible regulator charges a range of battery types, using a backlit LCD display to show power input and battery charge levels.
Finishing the kit, the Anderson plugs and battery clamps make hooking up batteries easy and the heavy duty carry bag protects the solar panels in transit.
Ironman 4x4 Solar Panels are the ultimate eco-power source on your next camping trip.
Features:
The Ironman 4x4 regulator is designed to charge a range of battery types, with a backlit LCD display providing power input and battery charge levels.
The regulator will optimally charge the following type of batteries:
- LEADCRYSTAL
- WET
- GEL
- AGM
- CALCIUM
- LTO
- LIFEPO4
- LITHIUM ION
When the solar panel is in use, they are exposed to large quantities of ultraviolet light and generate a significant amount of heat.
The premium 7 layer construction is designed to provide the optimal resistance to heat damage, improved durability and increased power supply through all conditions, whilst remaining portable and flexible.
With a fiberglass base, the solar panel is made up of layers of ethylene vinyl acetate (EVA) which forms a sealing and insulating film around the solar cells.
Monocrystalline solar cells provide the highest efficiency rates, 15-20% higher than polycrystalline cells, producing more power per square foot, with less space.
Finishing with a fluorite based plastic (ETFE), the solar panel is protected from high temperatures, corrosion and stains.
Specifications
| DIMENSIONS | |
| Dimensions (open): | 85" x 23" x .2" (2150 x 575 x 4mm) |
| Dimensions (closed/folded): | 23" x 21" x .8" (580 x 540 x 20mm) |
| Product Weight: | 25lbs (11.5kg) |
| SOLAR CELL | |
| Type: | A Grade Monocrystalline Cell |
| Material: | Silicon with EFTE Coating |
| KIT | |
| Cell Coating: | EFTE |
| Construction: | Cells assembled in shingle format |
| Rated Maximum Power: | 200W |
| Voltage @ PMAX (VPM): | 18.0V |
| Current @ PMAX (VPM): | 11.11A |
| Open-Circuit Voltage (VOC): | 22V |
| Short-Circuit Volateg (ISC): | 11.56A |
| REGULATOR | |
| Type: | PMW |
| Performance Specifications: | 12V/15A - Max Input: 22V @ 15A |
| Connections: | Inbuilt 50A Anderson & Direct Wire Compatible |
| Battery Types: | LEADCRYSTAL, WET, GEL, AGM, CALCIUM, LTO, LIFEPO4, LITHIUM ION |
| Waterproof / resistant (IP Rated): | IP65 |
| CONNECTIONS & CABLES | |
| Panels: | 2.5mmØ x 2 Core with 50A Anderson Plug & Covers |
| Panel to Regulator: | 2.5mmØ x 2 Core / 16-ft. with 50A Anderson Plug & Covers |
| Regulator to Battery: | 2.5mmØ x 2 Core / 5-ft. with 50A Anderson Plug & 20 Amp Inline Fuse & Battery Clamps |
This Kit Includes:
- 200W panel kit with built in stand
- 16-ft. cable with 50A Anderson plug and protective caps
- 5-ft. cable with 50A Anderson plug, protective caps, 20A in-line fuse and battery clamps
- Lithium compatible
- Heavy duty carry bag with storage pockets for cables and regulator
- Velcro straps to secure cables
- Metal pegs to secure the solar panels in use
- Operation instructions
Installation
View Instruction Sheet
