Nitro Gas 2" Suspension Lift Kit Suited for Toyota 100 Series Land Cruiser/Lexus LX470 - Stage 1
Ironman 4x4 Nitro Gas Suspension kits improve ride quality, stability, strength and handling over the factory suspension.
Perfect for outdoor adventures into the backcountry and back home again without breaking the bank.
Nitro Gas Kits give provide increased payload capacity so you can bring all of your gear out to your favorite spots without compromising safety, comfort or performance.
Vehicle Fitment
| Make | Model | Year |
|---|---|---|
| Lexus | LX470 | 1998 |
| Lexus | LX470 | 1999 |
| Lexus | LX470 | 2000 |
| Lexus | LX470 | 2001 |
| Lexus | LX470 | 2002 |
| Lexus | LX470 | 2003 |
| Lexus | LX470 | 2004 |
| Lexus | LX470 | 2005 |
| Lexus | LX470 | 2006 |
| Lexus | LX470 | 2007 |
| Toyota | 100 Series Land Cruiser | 1998 |
| Toyota | 100 Series Land Cruiser | 1999 |
| Toyota | 100 Series Land Cruiser | 2000 |
| Toyota | 100 Series Land Cruiser | 2001 |
| Toyota | 100 Series Land Cruiser | 2002 |
| Toyota | 100 Series Land Cruiser | 2003 |
| Toyota | 100 Series Land Cruiser | 2004 |
| Toyota | 100 Series Land Cruiser | 2005 |
| Toyota | 100 Series Land Cruiser | 2006 |
| Toyota | 100 Series Land Cruiser | 2007 |
Specifications
- Estimated Lift: 2"
- Package Details: Kit
- Suits Petrol Vehicles. Some middle eastern vehicles may use longer torsion bars (TOY051), check length before ordering.
Pressurized shock absorber boosts performance and adapts to a wide range of driving styles.
- NITROGEN GAS PRESSURIZED - Low pressure nitrogen gas dramatically reduces the likelihood of oil aeration and shock fade.
- 35mm TEFLON BANDED PISTON - Precision shim-stack piston specifically valved by Ironman suspension engineers, banded with teflon for smooth long life operation.
- 54mm TWIN TUBE BODY - Increased oil volume for improved cooling and endurance, Twin tube construction protects internal components from rock damage.
- 16mm – 18mm HARD CHROME PISTON ROD - Hardened and polished, volumetrically balanced to piston size.
- FLEXIBLE RUBBER BUSHES - Offers quieter operation and reduces damaging side loads from shock absorber.
- TRIPLE-LIP HIGH PRESSURE NOK SEAL - Maximum gas and oil retention ability to withstand high displacement offroad use.
- SUPPLEMENTARY WELDED MOUNTS - Fusion welded and supplementary welded for maximum strength and reliability.
- SINGLE PIECE BILLET EYE RINGS AND STEMS - Ultra robust design prevents breakage or bending of mounts.
- VEHICLE SPECIFIC VALVING - Every part number is specially valved for each vehicle application, this ensures the best possible ride and handling as intended by Ironman suspension engineers.
- EXTENDED TRAVEL - Suitable for standard and raised height vehicles, additional length increases wheel articulation.
- IMPACT RESISTANT STONE SHIELD - Steel or Polyethylene dust shield protects piston rod from impacts and road debris.
This Kit Includes:
- TOY050 - Front Torsion Bars (Petrol) (one set)
- Rear Coil Springs (one set)
- 12795GR - Front Shock Absorber - Nitro Gas (2)
- 12796GR - Rear Shock Absorber - Nitro Gas (2)
- BRACKET100 - Torsion Bar Reinforcement Bracket (1 Box contains right and left bracket)
Installation
View Lower Control Arm Reinforcement Instruction Sheet
NOTE:
When installing the rear coil springs on your 100 Series Land Cruiser, first identify the part number on the spring.
The coil spring marked “D/S” (shorter coil) should be installed on the passenger's side.
The coil spring marked “N/S” (taller coil) should be installed on the driver's side.
(The taller coil should be installed on the fuel tank side.)
