Raid Rear Bumper Kit Suited for 2016-2023 Toyota Tacoma

The world's first fully crash safety tested and SRS airbag compatible tubular style bumper to suit the 3rd gen 2016-2023 Toyota Tacoma. 

Leveraging our experience of designing and manufacturing vehicle armor for military, fleet, and recreational purposes, the mission was to create the safest, most feature-loaded 4x4 steel bumper on the market.

The RAID 4x4 bumpers blend the Australian mindset of functionality with American design characteristics. As a result, the protective bumper provides you and your passengers maximum safety for daily driving with the essential trail-ready features of improved vehicle protection, increased approach angle, and additional ground clearance. 

The Raid off-road steel rear bumper comes fully loaded with two frame mounted rated recovery points (3,500kg/7,700lbs) and can also include four OSRAM chip LED cube lights with up to 1920 lumens. All lights feature a flat, UV-stable polycarbonate lens designed to reduce rain/snow/ice build-up.

For 360 degree protection and further enhancement of on/off-road features for your Tacoma, pair with the RAID front steel bumper, RAID frame mounted heavy duty side steps, and our heavy-duty skid plate kit.  

Additional Features:

• Bolt-on, frame-mounted recovery points included (3,500kg/7,700lbs) with the rear bumper
• Integrated crumple zones transfer energy away from vehicle occupants
• ADR 69, 73 approved (Full Frontal and Offset Impact Occupant Protection)
• Tested to the highest standards in compliance with Australian Design Regulation, SRS Airbag tested and certified
• Pickled, cold-rolled steel manufacturing for impurity free template during assembly
• Ultra-durable AKZO NOBEL Black Powder Coat and pre-treated steel for rust resistance
• 360° Robotic welding for consistently precise welds resulting in peak quality and unequaled strength
• Increased approach and departure angles provide maximum clearance for obstacles
• Compatible with factory parking sensors

Trail Tacoma Reviews the Raid Rear Bumper Kit

"All in all, I am super stoked on this bumper. For a while, I never saw the appeal for aftermarket rear bumpers as they often looked bulky and overdone. But, Ironman designed this bumper very well with both protection and aesthetics in mind. In my opinion, the Raid rear bumper strikes a perfect balance between standing out in a crowd and not making my truck look overly bulky.

If you’re on the lookout for an aftermarket rear bumper that will not only make your truck look mean but also provide greater protection when you’re tackling a challenging obstacle, look no further.

Ironman does a great job at balancing beefiness without unnecessary bulk. I would highly suggest this bumper for anyone in the market for a rear bumper or even for those on the fence debating about whether or not they need one. Happy trails! " Trail Tacoma, read the full review here.

Trail Tacoma puts the Raid Rear Bumper Kit On Display:

Specifications

• Rear Bumper Approximate Weight: 105lbs (47.6kg)

This Kit Includes:

• Raid Steel Rear Bumper
• Bolt-On installation with mounting hardware

• Rear Bumper Lighting - 1st Pair (depending on selection can include one of the following):
• (2) 2.8" 20W Spot Beam LED Cube Lights - Clear
• (2) 2.8" 20W Flood Beam LED Cube Lights - Clear
• (2) 2.8" 20W Spot Beam LED Cube Lights - Amber
• (2) 2.8" 20W Flood Beam LED Cube Lights - Amber
• (2) 2.8" 12W Flood Beam LED Cube Lights - Red

• Rear Bumper Lighting - 2nd Pair (depending on selection can include one of the following):
• (2) 2.8" 20W Spot Beam LED Cube Lights - Clear
• (2) 2.8" 20W Flood Beam LED Cube Lights - Clear
• (2) 2.8" 20W Spot Beam LED Cube Lights - Amber
• (2) 2.8" 20W Flood Beam LED Cube Lights - Amber
• (2) 2.8" 12W Flood Beam LED Cube Lights - Red

NOTES:

• Does not include wiring harness.  Recommended wiring harness setup: 2x IWHL002.
• Not compatible with blind spot sensors.
• Not compatible with 2WD Toyota Tacoma models

Rear Bumper Install Video: